木托盤擺放方式：
Wooden pallet placement:
1、正反交錯式：同一層種，不相同列的以90度垂直堆積，木托盤相鄰兩層的堆積辦法是另一層旋轉180度的辦法。這種辦法類似于建筑上的砌磚辦法，不相同層間咬合強度較高，相鄰層之間不重縫，因而堆積后穩定性較高，但操作較為費事，且包裝體之間不是垂直面互相承受載荷 。
1, positive and negative interlaced: the same layer, not the same column with 90 degrees vertical accumulation, wooden pallet adjacent two storey stacking method is another layer of rotation 180 degrees. This method is similar to the method of building brick masonry, which has high strength between different layers and no seams between adjacent layers. Therefore, the stability is higher after stacking, but the operation is more difficult, and the load between the packing body is not perpendicular to each other.
2、旋轉交錯式：第一層相鄰的兩個包裝體互為90度，兩層間堆積又相差180度，這樣相鄰兩層之間互相咬合穿插，貨體的穩定性較高，不易塌垛。其缺點是，堆積的難度較大，且基地構成空穴，降低木托盤的運用功率。
2, rotating staggered: the first layer of adjacent two packaging bodies each other 90 degrees, two layers of accumulation and difference 180 degrees, so the adjacent two layers are interspersed with each other, the stability of the cargo body is high, not easy to collapse. The drawback is that the accumulation is more difficult, and the base constitutes a hole, reducing the power of wooden pallets.
3、縱橫交錯式：相鄰擺放旋轉90度，一層橫向放置，另一層縱向放置。每層間有必定的咬合作用，但咬合強度不高。
3, crisscross patterns: adjacent placed 90 degrees of rotation, one lateral, another layer of vertical placement. There is a certain bite effect between each layer, but the bite strength is not high.
4、重疊式：即各層堆積辦法相同，上下對應。這種辦法的利是，工人操作速度快，包裝貨品的四個角和邊堆疊垂直，承載才干大。缺點是各層之間缺少咬合作用，容易發生塌垛。在貨品低面積較大的情況下，選用這種辦法具有滿意的穩定性，如果再配上相應的緊固辦法，則不但能保持穩定，還可以保存裝卸操作省力的利益。
4, overlapping type: that is, the same method of stacking on each floor. The advantage of this method is that the workers operate fast, the four corners of the packaged goods are stacked vertically, and the carrying capacity is large. The drawback is that there is a lack of interlocking between layers, so it is easy to collapse. In the case of large goods in a low area, this method has a satisfactory stability. If the corresponding fastening method is matched, it can not only keep stable, but also save the benefits of loading and unloading operation.
